Files
OUCMirror-WebUI/docs/help/elrepo.md
T

51 lines
1.8 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
ELRepo 为 Enterprise Linux 系列系统提供额外的驱动、内核等软件包。使用前确认系统的主版本和架构:
```sh
cat /etc/os-release
uname -m
```
ELRepo 仓库版本必须与系统主版本匹配,不能将 EL9 软件包用于 EL10,也不要将其配置到 Debian、Ubuntu 等系统中。
## 安装官方仓库配置
先按 [ELRepo 官方说明](https://elrepo.org/)安装与当前系统匹配的 `elrepo-release` 软件包,并导入官方签名密钥。已经配置过 ELRepo 的系统可以跳过这一步。
备份仓库文件:
```sh
sudo cp /etc/yum.repos.d/elrepo.repo /etc/yum.repos.d/elrepo.repo.bak
```
## 替换下载地址
编辑 `/etc/yum.repos.d/elrepo.repo`:
1. 注释需要使用本站的仓库段中的 `mirrorlist=` 行。
2. 启用对应的 `baseurl=`,将其中 `http://elrepo.org/linux` 或 `https://elrepo.org/linux` 替换为 `https://mirrors.app.itstudio.club/mirrors/elrepo`。
3. 保留路径后面的系统版本、仓库名称及 `$basearch` 变量;保留官方配置中的签名检查和密钥地址。
例如 EL9 的基础仓库地址应为:
```ini
baseurl=https://mirrors.app.itstudio.club/mirrors/elrepo/elrepo/el9/$basearch/
```
这只是一行地址示例,不是完整的 `.repo` 文件。不要用它覆盖 `enabled`、`gpgcheck`、`gpgkey` 等其他设置。
## 刷新缓存
```sh
sudo dnf makecache
dnf repolist
```
`elrepo-kernel` 等可选仓库保持原有启用状态;需要额外内核时,应先阅读 ELRepo 的内核说明,再明确启用对应仓库。换镜像本身不需要更换内核。
如果元数据下载失败,检查 [ELRepo 目录](/mirrors/elrepo/)是否包含当前系统版本,并恢复备份后重试。
## 参考资料
- [TUNA ELRepo 使用帮助](https://mirrors.tuna.tsinghua.edu.cn/help/elrepo/)
- [ELRepo 项目与安装说明](https://elrepo.org/)